With energy-consuming equipment, such as water heaters and refrigerators, we have good data on energy consumption and can set clear standards accordingly. In some product categories—clothes washers, for example—Energy Star standards were adopted because those standards provide a high enough threshold to represent just the very top segment of the product market (less than 10%). In other product categories—e.g., refrigerators and dishwashers—we set a higher threshold than ENERGY STAR: for example, exceeding those standards by 10% or 20%. With lighting and lighting control equipment, certain generic products qualify, such as compact fluorescent lamps and occupancy/daylighting controls, while in other categories only a subset of products qualify. In some cases, products that meet the energy efficiency requirements are excluded, because of evidence of poor performance or durability. Microturbines are included here because of the potential for cogeneration (combined heat and power) that they offer.
Metlund Hot Water D'MAND System
-
-
All toilets and most showerheads today meet the federal water-efficiency standards, but not all of these products perform satisfactorily. With toilets and showerheads, we include products that meet or exceed WaterSense standards, which includes performance requirements—although we go beyond WaterSense where there are issues not adequately addressed by the program. We also look for other products that conserve potable water, such as rainwater catchment and graywater recovery and reuse systems.
Metlund Hot Water D'mand System is an electronically controlled valve and pumping system that rapidly distributes hot water from the water heater to fixtures in a home or commercial building. This system can operate either with a return line or by the existing cold-water line. The Metlund System pumps cold tapwater back to the water heater and delivers hot water instead, saving otherwise wasted water and shortening the wait for hot water. Because it circulates the water only on demand, this system avoids the energy penalties of continuously circulating systems. The Metlund System can also be activated by either a low-voltage remote button or a motion sensor.
Many conservation efforts—in industrial, commercial, and residential settings—are making significant improvements in water-use efficiency. These advances are also reducing our wastewater treatment burden and expense.
EPA's WaterSense program has developed a specification for bathroom sink faucets. In order to receive the WaterSense label, a bathroom faucet must have a maximum flow rate of no more than 1.5 gpm.
WaterSense has not yet developed a specification for kitchen sink faucets, but many manufacturers offer faucets with a flow rate of 1.5 gpm, 32% below the industry standard of 2.2 gpm. As kitchen sinks are often used to fill pots, a lower flow rate is not always optimal. Several manufacturers have introduced kitchen faucets with adjustable flow rates for convenience and water conservation.
GreenSpec lists products that dispense water efficiently, increase the energy efficiency of associated plumbing, or improve controllability of the water supply, such as foot pedal controls that help prevent long periods of running water. GreenSpec lists bathroom faucets that deliver water at a maximum of 1.0 gpm and kitchen faucets that offer adjustable flow rates or other benefits.
Many conservation efforts—in industrial, commercial, and residential settings—are making significant improvements in water-use efficiency. These advances are also reducing our wastewater treatment burden and expense. Products listed here dispense water efficiently or improve controllability of the water supply.
To qualify for GreenSpec, bathroom faucets must have a flow of 1.0 gallons per minute or less. Kitchen faucets may be up to 2.5 gallons per minute, but should be installed with foot- or other controls to prevent long periods of running.
LEED Credits
EAc1: Optimize Energy Performance
EAp2: Minimum Energy Performance
WEc1: Water Use Reduction
WEc3: Water Use Reduction
WEc3.1-3.2: Water Use Reduction
WEp1: Water Use Reduction—20% Reduction
WEp1: Minimum Indoor Plumbing Fixture and Fitting Efficiency
WEp1: Water Use Reduction
Ratings and Commentary
Add Comment
Similar Products
Manufacturer Information
Facebook
Twitter
just installed this in a retro application. Great device!